CLASSIC FUSION EXTRA–THIN SKELETON
Something completely new for the Hublot brand: an extra-thin skeleton watch, a Classic Fusion whose design has been refined, while retaining the dynamic and modern codesimmediately recognisable as Hublot.
With a 45 mm diameter, this watch is equipped with a new movement just 2.90 mm thick, developed by Hublot. It comes in a fully skeleton worked version, made to a resolutely graphic design, which enables expert eyes to admire the watch's regulating part, the balanceand the escapement… The dial side features the small seconds at 7 o'clock and the handsthat match the design of the very first Hublot watches, as a nice nod to the brand's history. With a 90-hour power reserve and 50-metre water resistance, this piece is available in two versions, one in titanium, limited to 1000 pieces, and the other in 18K King Gold, with just 500 pieces.
Exhibiting a marvellous balance between the classic extra-thin look, a symbol of watchmaking art, and Hubot's trademark dynamic and modern design, this piece is a fine exercise in style, providing a wonderful demonstration of the principle of fusion betweenTradition and Modernity.
Bezel:
Titanium or 18K King Gold, with vertical satin finish
6 H-shaped countersunk, polished & locked titanium screws
Crystal:
Sapphire with interior/exterior anti-reflective coating
Case-back:
Satin-finished titanium or satin-finished 18K King Gold with sapphire crystal,
interior anti-reflective coating
With a 45 mm diameter, this watch is equipped with a new movement just 2.90 mm thick, developed by Hublot. It comes in a fully skeleton worked version, made to a resolutely graphic design, which enables expert eyes to admire the watch's regulating part, the balanceand the escapement… The dial side features the small seconds at 7 o'clock and the handsthat match the design of the very first Hublot watches, as a nice nod to the brand's history. With a 90-hour power reserve and 50-metre water resistance, this piece is available in two versions, one in titanium, limited to 1000 pieces, and the other in 18K King Gold, with just 500 pieces.
Exhibiting a marvellous balance between the classic extra-thin look, a symbol of watchmaking art, and Hubot's trademark dynamic and modern design, this piece is a fine exercise in style, providing a wonderful demonstration of the principle of fusion betweenTradition and Modernity.
References:
515.NX.0170.LR - Titanium, 1000-piece limited series
515.OX.0180.LR - 18K King Gold, 500-piece limited series
515.NX.0170.LR - Titanium, 1000-piece limited series
515.OX.0180.LR - 18K King Gold, 500-piece limited series
Case:
"Classic Fusion" - Diameter 45 mm
Titanium or 18K King Gold, polished and satin-finished
"Classic Fusion" - Diameter 45 mm
Titanium or 18K King Gold, polished and satin-finished
Bezel:
Titanium or 18K King Gold, with vertical satin finish
6 H-shaped countersunk, polished & locked titanium screws
Crystal:
Sapphire with interior/exterior anti-reflective coating
Bezel Lug:
Black composite resin
Black composite resin
Crown:
Polished titanium or 18K King Gold, with Hublot logo
Polished titanium or 18K King Gold, with Hublot logo
Case-back:
Satin-finished titanium or satin-finished 18K King Gold with sapphire crystal,
interior anti-reflective coating
Water resistance:
5 ATM, i.e. approx 50 metres
5 ATM, i.e. approx 50 metres
Dial:
Sapphire with silvered or red gold Hublot logo transfer
Anti-reflective coating on topside/underside
Sapphire with silvered or red gold Hublot logo transfer
Anti-reflective coating on topside/underside
Hands:
Polished & rhodium-plated or red gold-plated
Polished & rhodium-plated or red gold-plated
Movement:
HUB1300 hand-wound skeleton
Small seconds at 7 o'clock
HUB1300 hand-wound skeleton
Small seconds at 7 o'clock
Thickness:
2.90 mm
2.90 mm
Components:
123
123
Jewels:
23
23
Frequency:
3 Hz (21,600 Vib/h)
3 Hz (21,600 Vib/h)
Power reserve:
Approximately 90 hours
Approximately 90 hours
Wristlet:
Black alligator strap stitched onto black rubber
Black alligator strap stitched onto black rubber
Clasp:
Deployant buckle in black PVD steel or 18K red gold
Deployant buckle in black PVD steel or 18K red gold